Stuck between a budget and a dream kitchen? You’re not alone. In 2026, Perth homeowners are choosing flat-pack cabinets that look like custom builds but cost less than half what joiners charge. With no assembly fees, no installers, and no custom fees, you’re not just saving money — you’re reclaiming control. And the best part? You can build your own kitchen in your own time, in your own space, with cabinets that fit your exact measurements.
720 mm high base cabinets installed on 150 mm feet mean your kitchen looks tall and modern without needing a lift. We’ve supplied dozens of these in homes across Belmont, and every single one looks clean, crisp and ready for real life — not a showroom. You don’t need to wait for a tradesperson to come. You just need to open the box, read the manual, and start putting it together.
Why Flat-Pack Wins for Budget Kitchens
- Flat-pack cabinets are pre-cut, pre-drilled, and pre-assembled with soft-close hinges and drawer runners — no extra tools or skills needed
- You assemble your own kitchen, which cuts out labour costs and lets you choose when to fit it
- Every cabinet includes 18 mm MDF thermofoil doors, 16 mm HMR melamine carcases, and stainless steel T-bar handles — no compromises
Dimensions That Fit Real Australian Homes
Forget custom sizes. We only stock standard widths from 150 mm to 1100 mm, in 50 mm steps. That means you can fit your kitchen into a 2.4m wide galley, a 3.6m wide standard layout, or even a 4.8m wide open-plan kitchen — without needing to alter your walls or floor plan.
| Layout Type | Typical Width | Recommended Cabinet Sizes | Cost Range (AUD) |
|---|---|---|---|
| Small Galley | 2.4m | 600mm, 900mm base cabinets | $1,500–$2,200 |
| Standard Galley | 3.6m | 600mm, 900mm, 1000mm base cabinets | $2,500–$3,800 |
| Large Open-Plan | 4.8m+ | 900mm, 1100mm base cabinets | $4,000–$6,000+ |
For example, if your kitchen is 3.6m wide, you can fit three 1100mm base cabinets side by side — or four 900mm ones — depending on your layout. You can also add wall cabinets above or pantries beside. All our cabinets are 300mm deep, so you don’t need to worry about depth conflicts or awkward corners.
Real-World Example: A Perth Kitchen That Fit Perfectly
One customer in Belmont had a 3.2m wide kitchen with a 1.2m deep corner. She wanted to fit a microwave, a rangehood, and a pantry — all in one go. We recommended our 600mm microwave cabinet, our 600mm rangehood cabinet, and our 1000mm 3-drawer pantry — all gloss white, all flat-pack, all assembled by her. Total cost? $2,300. She didn’t need to hire anyone. She didn’t need to wait. She just needed to read the manual.
She installed the microwave cabinet first — 430mm high, 600mm wide, 520mm deep — then the rangehood cabinet — 600mm wide, 600mm deep, 300mm high — then the pantry — 1000mm wide, 2055mm high, 300mm deep. All with soft-close drawers, T-bar handles, and adjustable feet. She didn’t need to measure twice. She didn’t need to cut anything. She just needed to put it together.
Step-by-Step: How to Assemble Your Own Kitchen
- Check your wall measurements and cabinet dimensions. You need 720mm height for base cabinets and 300mm depth for wall cabinets.
- Assemble your base cabinets first — fit the drawer runners, then the hinges, then the doors.
- Install the wall cabinets next — use the 150mm adjustable feet to level them.
- Fit the appliance cabinets last — microwave, oven, rangehood — all with included mounting brackets.
- Test all drawers and doors. If anything doesn’t close, check the hinges or runners — they’re all soft-close and self-adjusting.
Most people take 3 to 5 hours to assemble their kitchen. If you’re not confident, you can book a free design session with us — we’ll show you how to fit it, and we’ll even give you a sample cabinet to try out.
Flat-Pack vs. Custom Joinery: What’s the Real Difference?
Custom joinery is beautiful — but it’s expensive. You pay for every cut, every drill, every nail, every hour of labour. With flat-pack, you pay for the cabinet — not the labour. You get the same quality, the same finish, the same hardware — just without the tradesperson.
Here’s how it breaks down:
- Flat-Pack: $1,500 for a kitchen kit (base cabinets + wall cabinets + appliance cabinets + pantry)
- Custom Joinery: $5,000+ for the same layout — plus you pay for the tradesperson’s time
- Flat-Pack: You assemble it yourself — no extra cost
- Custom Joinery: You wait for the tradesperson — no control over the schedule
Flat-pack cabinets are not “cheaper” — they’re “more affordable.” You’re not paying for the labour, you’re paying for the materials. And you’re not paying for custom sizes — you’re paying for standard sizes that fit your home.
What About Laundry and Pantry Cabinets?
Our pantry cabinets are 2055mm high, 300mm deep, and come in 400mm, 600mm, and 1000mm widths. For example, our 1000mm 3-drawer pantry is A$1,098 — and it includes soft-close drawers, T-bar handles, and adjustable feet. You can fit it beside your fridge or under your stairs — no custom sizes needed.
Laundry cabinets are also flat-pack — 300mm deep, 720mm high, and available in 400mm, 600mm, and 900mm widths. Our 600mm laundry cabinet is A$164 — and it includes a drawer, a door, and a T-bar handle. You can fit it in your laundry, your garage, or your utility room — no custom sizes needed.
FAQ Section
Related Articles
- 2026 Cheapest Kitchen Cabinets Australia Under 1000
- Flat-Pack Kitchen Assembly Tips
- Affordable Kitchen Renovation Perth
- Modern Kitchen Design Perth
our kitchen range kitchen kits 3D kitchen planner assembly instructions
